Xingtai Kangyong Machinery Manufacturing Co., Ltd

Home >> News >>Industry News >> Deep disassembly of car wash machine hardware system: technical collaboration of motor, bristles, and sensors
Details

Deep disassembly of car wash machine hardware system: technical collaboration of motor, bristles, and sensors

Introduction

The hardware system of a car wash machine is the core carrier of its performance, from the motor that drives the water flow to the bristles that come into contact with the car paint, to the sensors that sense the environment. The technical parameters of each component directly affect the cleaning effect and equipment life. This article will take mainstream models of car washing machines such as Chezhijie and Yikilometer as examples to deeply analyze the technical collaboration mechanism of the hardware system of car washing machines, and reveal how they achieve efficient and stable operation through precision design.


1、 Motor system: the "heart" of power source

The motor is the power core of the car washing machine, and its performance directly determines the water pressure stability and energy efficiency. The current mainstream models adopt the following two motor schemes:


induction motor

Technical principle: By using the principle of electromagnetic induction to convert electrical energy into mechanical energy, it has the characteristics of stable speed, low noise (<65dB), and long lifespan (>10 years).

Application scenario: High end commercial car washing machines (such as the Chezhijie tunnel type model) commonly use induction motors with a rated power of 15-20kW, which can support continuous operation of high-pressure water knives above 120Bar.

Technical optimization: Some models achieve dynamic adjustment of motor speed through frequency conversion technology. For example, when cleaning SUVs, the Yikilometer intelligent car washing machine will increase the motor speed from 3000rpm to 3500rpm to enhance the water flow impact force.

universal motor

Technical principle: By using electric brushes and commutators to switch the direction of current, it has the advantages of high starting torque and low cost (40% lower than induction motors).

Application scenario: Portable car wash machines for household use (such as wireless lithium battery models) often use series motors, with a power of usually 2-5kW, which can meet the cleaning needs of 80-100Bar.

Technical limitations: Electric brush wear results in a short lifespan (about 3-5 years) and high noise during operation (>75dB).

Collaborative design of motor and pump body:

High end models adopt a "motor pump integrated" structure, reducing energy loss through coaxial design. For example, the Chezhijie Super efficient series integrates the motor and plunger pump into the same housing. Actual test data shows that its energy conversion efficiency is 12% higher than the split design, and the power consumption of a single car wash is reduced by 0.8 degrees.


2、 Brushing System: Balancing Cleanliness and Paint Protection

Brushes are components that come into direct contact with the car wash machine and paint, and their material, density, and movement determine the cleaning effect and risk of damage. The current mainstream brushing techniques include the following three categories:


EVA foam cotton bristle

Technical principle: closed cell EVA foam with low density (0.2-0.3g/cm 3) and good resilience (compression deformation rate<10%).

Application scenario: EVA foam cotton bristles are widely used in high-end non-contact car washing machines (such as Yikm intelligent models), whose surface smoothness reaches Ra0.8 μ m, which can reduce the friction coefficient with car paint.

Technical optimization: Some models are coated with a nano hydrophobic coating on the surface of the bristles, making it difficult for stains to adhere. Actual testing shows that the cleaning efficiency of coated bristles is 25% higher than that of ordinary bristles.

Polypropylene (PP) soft bristle brush

Technical principle: By changing the cross-sectional shape of PP fibers (such as cross or trilobite), the cleaning power is enhanced, while controlling the hardness (Shore hardness 50-60A) to avoid scratching the car paint.

Application scenario: Commercial reciprocating car washing machines (such as the Chezhijie Longmen model) often use PP soft brushes, which have a lifespan of over 5000 trips.

Technical limitations: Long term use may lead to clumping of bristles due to residual stains, requiring regular replacement (recommended every 3 months).

Silicone bristles

Technical principle: It is made of food grade silica gel, and has the characteristics of high temperature resistance (-40 ℃ to 200 ℃) and anti-aging (service life>8 years).

Application scenario: Special scenario car washing machines (such as construction site vehicle cleaning equipment) commonly use silicone bristles, which can withstand corrosive substances such as mud and oil stains.

Brushing motion control technology:

High end models achieve precise motion control of bristles through servo motors. For example, the Car Wash Jie 3D laser scanning system can adjust the rotation speed (50-200rpm), lifting height (0-2.5m), and contact pressure (1-5N) of the bristles in real time based on the vehicle model data, ensuring a balance between cleaning power and paint protection.


3、 Sensor System: The "Neural Network" of Car Washing Machine

Sensors are key components for achieving intelligence in car washing machines. They provide decision-making basis for the control system by monitoring environmental parameters and equipment status in real time. The current mainstream car washing machines are equipped with the following four types of sensors:


3D LiDAR

Technical principle: By emitting laser pulses and measuring reflection time, three-dimensional point cloud data of the vehicle body is constructed.

Application scenarios: Vehicle recognition, bristle path planning. For example, the 16 line LiDAR of Yikilometer intelligent car washing machine can generate 300000 data points per second with an accuracy of ± 2mm.

pressure sensor

Technical principle: Detecting changes in water flow pressure through strain gauges and transmitting signals to the control system.

Application scenarios: dynamic adjustment of water pressure, fault warning. For example, the water pressure sensor of the Car Wash Jie Super Efficiency series can monitor the spray arm pressure in real time, and automatically stop and alarm when the pressure is abnormal (such as>150Bar).

Visual camera

Technical principle: Capturing the state of car paint through CMOS image sensors, combined with AI algorithms to identify defects such as scratches and stains.

Application scenarios: Cleaning strategy optimization, damage warning. For example, the vision system of Yikilometer intelligent car washing machine can process 50 frames of images per second, with a recognition accuracy of 0.1mm level.

proximity sensor

Technical principle: By detecting the position of the vehicle through infrared or ultrasonic waves, ensure that the car washing machine maintains a safe distance from the vehicle.

Application scenarios: collision protection, automatic start stop. For example, when a vehicle enters the car wash room, the proximity sensor of the Chezhijie tunnel type car wash machine will trigger the light curtain safety system. If an obstacle is detected, the machine will immediately stop.

Sensor Fusion Technology:

High end models enhance system reliability through multi-sensor data fusion. For example, the Car Wash Jie 3D laser scanning system can combine visual camera data to accurately identify vehicle parameters even in complex environments such as strong light and backlighting. Tests have shown that sensor fusion technology can reduce the error rate of vehicle recognition to below 0.1%.


4、 Maintenance and optimization of hardware systems

The stability of the hardware system of the car washing machine needs to be guaranteed through regular maintenance, and key maintenance items include:


Motor maintenance: Check the insulation resistance of the motor every 3 months (should be>1M Ω), and replace the lubricating oil every 6 months (it is recommended to use Mobil SHC 634 synthetic oil).

Brush replacement: according to the use frequency, the PP soft bristle brush is replaced every 3 months, and the EVA foam cotton brush is replaced every 6 months.

Sensor calibration: Calibrate 3D LiDAR and visual cameras quarterly to ensure data accuracy. For example, Chezhijie provides specialized calibration tools, and operators can complete the calibration within 10 minutes.

Conclusion

The hardware system of the car washing machine is a model of technological collaboration, from the power output of the motor to the cleaning action of the bristles, and then to the real-time monitoring of the sensors, each component needs to be precisely designed to achieve optimal overall performance. With breakthroughs in materials science (such as nano coating bristles) and sensor technology (such as multispectral vision systems), the hardware system of future car washing machines will further evolve towards high efficiency, intelligence, and durability, providing better service solutions for the automotive aftermarket.


Technical Support: 网站建设 | Admin Login
seo seo